Peavey IPR 2 2000
The Peavey IPR2 2000 gives you as much as 2200 watts total depending on the ohms load. The IPR 2 2000 is a two channel amplifier with a combo input that accepts both XLR mic cable and 1/4" line level cables for input. The IPR2 also features quarter inch through outputs on both channels. Each channel on this Peavey amp can be set to high pass, full range or a sub-woofer!
With a built in crossover, you can connect two main speakers to channel A and sub-woofers to channel B and the IPR2 2000 will crossover the signal for you. The crossover point is set to 100 hertz. Outputs are typical speakon connections. The IPR 2 2000 is a two space rack mountable power amplifier that weighs only 7 pounds. Peavey uses the DDT Speaker protection to help guard your valuable speakers. The IPR2 2000 delivers a class D Power amp built with premium quality.
In a general setting with two fifteen inch speakers (eight ohms generally each) on each channel you would be pushing five hundred and thirty watts to each channel at this four ohm load for a total of one thousand and thirty watts. At a 2 ohm load this amp is capable of nine hundred watts per channel and eighteen hundred watts in total.
Let us know if you need any more information about this item or any of our other products. As always; you can get this product and many more for the lowest price online, right here at DC Music Store.
2- Channel independent fourth-order Linkwitz-Riley crossovers
Revolutionary IPR class D topology
Detented input controls
Speakon output connectors
Combi XLR 1/4" inputs
Rated Watts 2ch x 2 ohms: 1100 watts 20ms repetitive burst / 900 watts 1% THD both channels driven @ 1kHz.
Rated Watts 2ch x 4 ohms: 600 watts 20ms repetitive burst / 570 watts 1% THD / 530 watts 0.15% THD, both channels driven @ 1kHz.
Rated Watts 2ch x 8 ohms: 370 watts 20ms repetitive burst / 325 watts 1% THD / 300 watts 0.15% THD, both channels driven @ 1kHz.
Individual signal pass 1/4" jacks on each channel