Peavey PV115 Replacement Crossover. This crossover is the direct factory replacement for the PV115 series speakers. Simply unscrew the old crossover and unhook the wires and re-install the new crossover in the reverse order and you are back to rocking! Please let us know if you have any further questions or need a crossover for a different model than what we have available.
The crossover frequency in the PV 115 and this unit is 2.8KHz. It has two quarter inch inputs that are wired in parallel. So you can plug into either and use the other for daisy chaining to another speaker. Wired for 8 ohm (eight) load.
Peavey PV115 Crossover Measurements & Dimensions are:
Measurements of the crossover are 3 3/4" x 5 3/4" for the actual unit (that a hole in the cab would need to be) but it has ears all around it so that it can be screwed into a cab (with holes for screws) that extend 11/16" inch all the way around. This gives it a total dimension of about 5 1/8" x 7 1/8" inches. Depth is three and a three eighths of an inch from the very front of the unit to the deepest part that extrudes out of the back.
See the other pic which shows the back of the crossover.